engine starting and control

For charging and maintaining batteries used for

                         

TO INSTALL Easily accessed connections and external mounting holes make the job simple
TO ADJUST All adjustments are factory set but if changes are needed, they are easily made before the battery is connected!  Adjust the float and high-rate levels and set the high and low alarm points using only a precision voltmeter.  There is no need to bring the battery voltage up and down to set these voltage levels.  The auto-charge, rectifier fail and AC fail and alarms require no adjustments.  Current limit is factory set and sealed.  No need to adjust even if changing the control board.
TO MAINTAIN Should something go awry, all major components are easily exchanged.  A single PC-board is plugged in and switched in minutes.  No guess work in setting alarm levels.  Just adjust before the battery is reconnected.
TO SPECIFY Your requirements are met by standard features (See features list).  Specify only the DC volts and amps needed.
TO ORDER Units shipped from stock.  If desired, specify quantity and type of cells or float and high-rate charge voltages for exact factory settings.

  STANDARD FEATURES
AC line compensation DC voltmeter and ammeter
Precision voltage regulation Current limited - no cranking disconnect 
Completely solid state     required
Convection cooled - no fan Current limit factory sealed
Float, high-rate and AC-ON LEDs Cannot discharge battery during AC failure
Automatic timed high-rate charging Easily field adjustable without  battery       
Completely self protected     connection
Fully isolated - no direct AC to Control switch for manual float,

   DC connection

     timed high rate or automatic
Alarm package including high & low volts, rectifier fail and AC fail LEDs with  a  common relay       
  OPTIONS SPECIFICATIONS
AC line cord
Temperature compensation
Dripshield
AC on-off switch
AC input:  117VAC +/-10% 60Hz +/-5%  
DC voltage regulation +/- 1/2%
Protection - AC & DC fuses
Housing - stainless steel 
Mounting - Simple wall mtg. 
Meters - DC volts & amps 5% accuracy       
Temperature range:  -20 to 50° C  

DIMENSION

MODELS
HEIGHT 12.75"
WIDTH     9.5"
DEPTH     7.5"
      Volts     Amps     Weight (1bs)
EZ   -12        -10              15
EZ   -24        -  6              15
EZ   -24        -10              20

                                                                               

                   

    

      Phone:  401/231-5227    Fax:  401/231-6155
     E-Mail:  SALES@ABC-CHARGERS.com